technique

Physical techniques used in making a quilt

Drawing on Distortion: Give it a Kiss, Because It’s Going to Pucker Up

| ellenanneeddy

One of the issues with free motion embroidery is that it always puckers up. You always have some distortion. The worst is that the distortion is uneven and unpredictable. Sometimes it pulls the piece out of shape or makes it unrecognizable. Free motion objects take a lot of time. It’s heart breaking to have them distort past usability. It’s best to adjust for that from the start.

There’s some time honored ways to deal with distortion. First make the embroidery off the surface of the quilt. It can be applied afterwards with minimal distortion. I will be talking about separate embroideries in this article, although the information works for both off and on the quilt surface.

Stabilizers help a lot. Small embroideries under 2″ use three stabilizers all together. The drawing itself is on Totally Stable. It’s a lightweight stabilizer that irons on and is removeable. Stitch and Tear is the next layer. It’s a stiff tear away Pellon. Then I use a layer of acrylic felt that absorbs much of the stitching. I prefer the thinner versions. I attach the stitch and tear and felt with 505 spray. For anything larger, I use a layer of hand dyed fabric as the top layer.

Do remember that the drawing on the back will face the opposite side on the front. I know, I know. Think of it as looking through a slide backwards.

Now it gets confusing. My drawing layer is on the back. I’m going to turn it upside down to stitch. I’m not going to call them top and bottom. The sandwich has a front and the back. For stitching purposes the front is on the bottom and the back is on top. Got it?

I am using two hoops. Sharon Schamber’s red weighted halo hoop is my very favorite. It has a weighted core and a rubber coating. It grips and the weight supplies support.

Now it’s all up to the drawing. We can’t accurately predict the distortion but we can take some good guesses. To do that we need to look at the zigzag stitch

The zigzag stitch pulls across the stitch. The more layers of stitching, the more distortion. For a larger piece, you need to draw to adjust for that distortion. Mostly that means that things need to be a lot wider and bit longer. But you need to analyze the drawing to see where the distortion is likely to be bad.

So if you’re doing a straight zigzag stitch down the legs, it will shrink in the width. You’ll want to make it a bit wider there so it doesn’t become pencil thin.

Bird feathers end with a band of stitching around the end of the feather. Again, making the feathers longer and a bit too wide gives your a bit of extra space there will help eliminate the shrinkage effect.

original image
adjusted image
new traced image

I’ve elongated the wings and body on the kingfisher. I wasn’t able to get it completely embroidered to show you, but you can see the shrinking on the feather and the wings

back side of bird mostly embroidered
front side of bird mostly embroidered

It’s not a science. But you can hedge your bets for your best look. Keep watching my face book page to see how this bird looks finished.

What happens if you guess wrong? Several things. Sometimes that wrong guess works better than a correct guess. Sometimes I cut into an embroidery and anchor it with stitching to address the error. One thing is certain. Perfect happens somewhere else. I’m content with beautiful.

I’ll Be Feathered: Creating Feathers in Thread

| ellenanneeddy
Green heron

Feathers are perfect subjects for thread. Birds too, but there are many kinds of feathers, defined as always by the angle of the zigzag stitch.

I’ve been working on two birds this couple of weeks: a green heron and a goldfinch.

Goldfinch

It starts with a drawing. This is a drawing on Totally Stable. It goes on the back of the sandwich so it’s my pattern.

The head and underbody of the bid are soft overall feathers. These can be made with a back and forth zigzag stitch done side to side. Layer after layer of thread blends the colors.

Underbelly and leg
Head
top section of wings

The upper part of the wing follows the arc of the feather, shaded with the side to side zigzag The feathers are lined with gold and soft yellow to define them.

Pinions

The pinion feather stitching is made with angled stitches down the feather with a curved arc at the end.

The streak

These feathers have a streak of yellow defining the quill.

Quills do

All in all the stitching separates the kinds of feathers. And creates a bird made strictly of thread and stitchery.

Romancing the Rose

| ellenanneeddy
Dragonflies and roses

Commissions force us to do many things. I don’t do realism well. Realism is why God made cameras. Art isn’t limited to realism. But there are people who love it. And need it. Truth to be told, l’m not good at it.

So my birds have purple and blue in them, and so do my frogs. It’s part shading, part colors building.

Dragonflies and roses detail l

I tend to make roses on spirals. It’s the way petals unfold.

Sometimes I let the tails spiral out. I like their motion. I’m told it’s not very realistic.

I have used rubbing plates for a more real rose. This is oil paint stick on hand dyed fabric. Outlined in metallic threads.

Lately I’ve tried roses with the points trimmed away or tucked in.

Will they be realistic enough? That remains to be seen. But they are probably as real as I can get.

Time Considered as a Helix of Semi-Precious Fabric: With Apologies to Samuel R. Delany

| ellenanneeddy

I’ve worked on cleaning up the studio over the last two days. Finishing The Garth left me done in a lot of ways. It’s hard to change gears and start something new. Usually I fish around for what’s left over from something else to make something new. It’s kind of like stone soup. You start something out of pretty much nothing and throw things in. It works for me. It isn’t often I start something out of complete nothing. There’s something left over, and it needs it’s own place.

You can really measure time in objects. Certainly you can measure time in work you’ve done. I was thinking about how my work has changed over the years. I’ve been quilting since I was 21. I’m 68. I have had time to see the art quilt movement start, grow, boom, explode, and retreat a bit . But if I’m honest about it, much of what I did was about the fabrics that were available to me. So I thought I’d look back at some of my work, and show where it shifted for me. Please forgive some of these photos for their size and detail. Some of them are quite old and out of my hands.

Solid colors:

I made my first quilts as bed quilts. I made them. We used them. They died, as most bed quilts do.

After that I fell in love with Amish quilts. That kind of stitching can only show up on solids. They arrived on the quilt scene around in the beginning 1980’s . Of course I couldn’t hand stitch them either. I was a dreadful hand quilter always. I worked with a walking foot and quilting by counting four stitches over for each row.

Hand Dyed Cotton

I’d been dyeing fabric since I was ten. But it was a game changer when I started treating dyed fabric with sponge painting. It gave me a light source within the quilt that I didn’t need to piece.

Sheer Fabrics:

I discovered sheers and laces as applique for translucent things like water, air, fire and flower petals. It gave me a way of layering things objects. It’s a cool trick and I still use it.

Weird brocades:

I first came into fancy brocades at the textile discount outlet in Chicago. But I’ve hunted them ever since. They make magnificent bugs.

Hand Dyed Cheesecloth:

Hand dyed cheesecloth makes a marvelous sheer. And It acts just like cotton because it is cotton. Here I used it to make mountains, but I’ve used it for flowers, mushrooms, rocks, and all kinds of things. The texture is cool too.

Oil Stick Rubbed Fabric

Oil Rubbed Fabric.

For as much as I avoided prints and textures, I’ve now fallen in love with the textures I can create with paint stick rubbed fabrics.

As I was cleaning out my studio I found all of these things. Some of them I use constantly. Some of them I see as a thing I outgrew a while ago. But art is not measured by our products. It’s measured by learned skill, new ideas and inspiration in use.

Nothing Exceeds Like Excess

| ellenanneeddy

Nothing Exceeds Like Excess

962-21 Queen Bee

I’m not the sort of person who does things half way. I’m just not built that way. So when I did a little experiment with some oil stick rubbed fabric, it sort of got out of hand. I had a handful of some smallish scraps and tried some straight stitching with 40 weight metallic in a manner I hadn’t used for a while. I spent about a week on it and found myself with a good dozen little quilts.

They were also experimental in the sense that they’re smaller than I usually work. Tiny. We’ve talked about working in different sizes. Size is actually about your art filling the space where it lives. Intricate small art fills small places. Large art tends to lose the intimacy of tiny work.

Small work fills in differently. Attaches to the eye differently. But there is another nice thing about small work. It can sell for a lot less money.

Which is a good idea right now. Remember that thing about me not being able to do things half way? Two weeks ago, I found an old Elna Supermatic green sewing machine.

Actually I found 2. One perhaps for parts. I’m a Bernina girl from way back. I love the stitches on the Bernina. But the old Elna has a different bobbin mechanism that’s set up to adjust for thick thread.

Remember that large pile of #10 pearl cotton I dyed up? That kind of thick thread. Don needs to do some repair on them, but I can’t wait.

Which is how I find myself needing to catch up after having bought two older sewing machines out of budget. So the new quilts are going on sale, to help me catch up.

I’ll have all my work at my Etsy Shop on sale for 20 percent off for a month. If you’ve wanted a quilt, this might be your moment. And there’s new experimental stuff I think you’ll enjoy seeing. Do let me know what you think. It’s not like I can really do anything by half.

New Threads:

| ellenanneeddy

There’s nothing like new threads. You know I love thread. It’s the most important component in my art. I love my fabric but I am nuts over thread.

One of the things that is different for me now that I am no longer on the circuit, is that I don’t have to make threads that are commercially saleable. I’m not constrained by that so I can explore threads that can’t be reproduced in regular quantities for students. I’ve used # 8 pearl cotton because it came in dye hanks. I could easily dye it for myself but also for also for students who were in my class and needed access to the threads I worked with.

#10 pearl cotton

Now that I just in my studio working my own art, I have the freedom to work with things that can’t easily be put up for sale. This last dye load, I dyed up a load of thread that I’m so excited by. I’m looking forward to trying out my #10 pearl cotton.

You can’t dye thread wound in a ball. You can hank it off with a swift, but there’s no way to make even skeins without counting accurately. Those of you who know me know how likely that is.

8 and 10 pearl cotton

The smaller ball is #8 pearl. The larger on is #10 pearl. The larger the number the smaller the thread. The #10 still needs to be worked in the bobbin case, but it will give a finer grain stitching. I’ve started the first row on this frog in the #10 so you can see how it stitches up. I am so excited!

frog in #10 pearl cotton

Sometimes a change in materials changes our work immensely. Sometimes it makes a little change. Sometimes it changes nothing. There’s no way to know until you work with things. But the possibilities make me giddy.

Skimming the Surface: Bobbin Work as Stippling: Part 4

| ellenanneeddy

Up until now in this series, we’ve worked on images both in thick and thin threads, in zigzag and straight stitching. There’s one other place I use bobbin work. I use it for stippling.

Why? More of those wonderful, beautiful, difficult threads.

It’s no secret I’m a magpie. I love things that are shiny. And I always want to pull the eye across the quilt.

I often use Sliver, which I’ve shown you before, as a stippling thread. It’s fragile. It can be used with Sewer’s Aid and a #90 topstitching needle but it’s always easier to put it in the bobbin and match it with a polyester or rayon 40 weight. I’ll start with the lightest color around my light source, and shade outward one color after another. It helps define the light source, carry your eye across the piece and make it all shine.

I love sliver as a sky stipple or as water. So many colors! And so many ways to shift the color across the surface of the quilt.

But sometimes I like to do something different with water though. I love sliver, but it doesn’t show up as well over organza or lace. So I like to use the #8 weight metallics, again in the bobbin. They make wonderful waves and rivulets. This is a thread you can use only in the bobbin. It defines the movement of water beautifully.

Everyone always worries about not being able to see from the back, but it ‘s not that hard. Here’s an unfinished piece almost ready for stippling. You can see the sun, the dragonfly and the rocks all on the back side, All you have to do is stipple.around them.

I hope this series leaves you excited and able to try all kinds of threads you thought were too hard or too difficult to work with in the bobbin. It’s a brand new world of possibilities, and beautiful choices.

Zigging Upended: Zigzag Machine Applique: Bobbin Work 3

| ellenanneeddy

The last two posts we did looked at bobbin work for thick thread. This time we’ll look at a whole other reason to work from the bobbin and a whole different result.

Everyone loves metallic thread. It’s beautiful. I’ve heard it described as candy. I concur. That is until you start to stitch with it. There are a number of things that make it “easier” to work with metallic thread. But no one ever says it’s easy.

Why? If you look at the construction of metallic thread, it’s pretty obvious. Metallic thread comes in a twisted flecked thread, a metallic colored lurex wrapped around a core, and a thin strand of lurex. Either way, it’s thread made to be shredded. It’s not one solid strand of one thing. It’s a combination that uncombines with ease.

How do we get around that? Sewers Aid (silicon treatment for thread) and a number 90 topstitching needle help. But the easy answer is to put it in the bobbin and work from behind.

I know. I know. I can hear you screaming “What????” at me through the computer screen. Sensibly enough. But any time my thread goes through the top of my machine, it goes through the needle 50 times. It gets pulled up through the bobbin once. Are you wondering why your thread broke? It’s so much easier to put the breakable thread in the bobbin.

Madeira Supertwist Metallic Thread

For this, I used #40 weight metallic thread. I really like Madeira’s Supertwist for it’s color and shine and the color range. So we don’t need an adjusted bobbin case. We can use the regular bobbin case. But we still want to match the needle thread color to the metallic thread color. You will see both threads on the right surface of the quilt.

I do these most often as appliques. Why? Because they really pucker up. The distortion on zigzag stitching is ferocious. I make the same sandwich as last week, my drawing on Totally Stable, Stitch and Tear, felt, and hand dyed fabric.

I’ve talked a lot in this blog about free motion zigzag stitching. What matters is the angle that the fabric goes through the machine. Straight through gets a thick clunky line. At an angle gets you a very nice outline. Going from side to side gets you a great shading stitch. All out of the same zigzag.

I started by zoning my piece so I know the areas where the color changes.

I began with a black out line zigzag. Then I built my colors in, first with an outline, then the shading and then that clunky line to smooth it out, one shade after another, starting from dark to light. The last color I put on will be the color I see the most.

Here’s the process shots for this frog.

  • spots
  • spots from back
  • outline
  • green shading
  • purple shading
  • turquois shading
  • medium green
  • lighter green
  • medium purple
  • lightest green
  • soft purple stomach
  • apricot shading
  • light yellow
  • finished frog

After I’ve stitched it completely, the stitching lay flat, but the area around it ruffled like a party dress. I cured the whole thing by simply cutting off the background.

To apply it to my quilt, I stitched it down with the same black thread outline, run through at an angle to make a great smooth edge.

What is the difference between thin thread and thick thread?

Thick Thread

Bobbin Case Only

Adjusted Bobbin Case

Always Abstracted by Stitching

Puckers Up Some

Thin Thread

Use in Needle or Bobbin Case

Regular Bobbin Case

Can Be More Detailed and Shaded

Puckers Up Mightily

The other major reason to use bobbin work with thin thread is because you can tie up the ends on the back. Every time you clip your threads from the front, there’s two thread ends poking up. For multiple layers of stitching, that can make the whole piece look fuzzy. I always prefer to work from the back and tie my ends up from behind, to keep them out of sight. This works just as well for poly/and or rayon threads as well. These moths were done upside down as well, but with poly threads only.

Don’t be afraid to work upside down! You’ll find all kinds of threads that have been fiends are now your best friends.

Topsy Turvy: The Wonders of Thick Thread: Bobbin Work Part Two

| ellenanneeddy
Thick metallic thread and pearl cotton bobbin work make up the heron

Do you like instant gratification? But of course! Using thick thread in the bobbin is showy, exciting and quick as machine embroidery goes. It’s one of my favorite techniques.

Bobbin work is the only way I know to free motion with thick threads. I’m defining thick threads as #3-8 threads. What those numbers mean is that if you put 8 threads side by side, they would make an inch. This is what thread count means.

adjusting a bobbin case

Thick threads can’t fit through the needle. They do fit easily in an adjusted or bypassed bobbin case. How do you know what kind of machine you have. If you open up your bobbin and it’s in a little silver housing that comes out of the machine, that’s a bobbin case. For thick thread, you loosen the bobbin case by turning the screw about 3/4 of a turn to the left. It’s best to have a separate bobbin case for the purposes. Bobbin cases get old, so it’s never a bad idea to buy a fresh one and make your new bobbin case your true bobbin case. Mark the old one with nail polish, and keep it just for thick thread.

If your bobbin just drops into a housing in your machine, it can be bypassed. You simply don’t put it into tension. No need to adjust anything.

I tend to keep extra bobbins to hold and store thread I’ve wound off. One bobbin per thread. If I don’t use it for one project, I’m bound to use it for another.

Never wind a bobbin on top of thread on the bobbin. It messes terribly with your tension.

I usually stitch on a similar fabric to the background, or one that matches the color of the embroidery. Don’t fool yourself. IT WILL SHOW!

a different frog, zoned

Your image is always backwards. Think of it as a slide. You can see it through either side. I use Totally Stable as my patterns, drawn with marker. It irons on but the excess will tear away.

Stitching in a creature is like coloring with different crayons. I pick black as my outline, and then I zone my drawing. On this frog, there’s a tummy zone, a stripe zone, an eye zone, and the basic body.

I choose my darkest thread in that zone first, the color I want to be dominate. I add a shader color, usually purple, brown or a complement to the color. Then I go through a range of the color, dark to light, and add a shocker color, usually the complement right before the last lightest color.

eye colors in sliver

The eye is always done in sliver thread so it’s shiny and wet. I use black for the pupil, an iris color, and iridescent white for the spark.

Eye

Here’s a progression of stitching and thread on this frog

  • thread one green zone
  • thread two green zone
  • thread three green zone
  • thread four green zone
  • thread five green zone
  • thread one stripe zone
  • thread two striped zone
  • finished frog on background

Some basic things about thick thread bobbin work:

Only work with a straight stitch: Zigzag stitching tends to sew your piece to your needle plate and jam your machine.

When you fill in your stitching, remember that the thick thread fills up more space than the thinner thread on top. Leave a little space.

Pick a #40 weight embroidery thread for the top thread. I like polyester, for it’s strength. You should either match the color to your bobbin thread, or like the mix of them together. You will see both on the front of your piece.

New project, new needle! New day, new needle! I use #90 topstitching needles because they’re strong and have a large eye that reduces thread breakage.

Midnight Stroll

I could stitch directly into my top as well. It integrates better into the background, but it tends to distort things. If an image is under three inches square, I may well embroider right on the surface.

frog cut out and ready to go

But if it’s a big enough image, It’s better done on a separate sandwich of felt, Tear Away, Totally Stable and suitable hand dye to match. It can be appliqued onto the surface and will look like it belongs perfectly

Don’t be afraid to be upside down. Bobbin work makes the most impressive images quickly and easily.