materials

Wringer Washer Woes and Wonders

| ellenanneeddy
Don with Frank

I’ve talked before about using old-fashioned appliances for dyeing. They are hidden gems for dyers! They are made especially for cotton and other plant fibers and work brilliantly in processing cotton.

Now that I’m no longer constantly on the road, I don’t dye as much as I used to. I used to dye around 50 yards of fabric a month. Now I dye around 20 per three months. It’s usually for my own use now, although I make some available in my Etsy shop, and you can always call me up and pick out the fabric you’d like on Zoom or Messenger.

But 50 yards or 20, that’s a lot of fabric to wrangle around. I’ve written about mangles. They are awesome ironing tools. But the other ancient appliance I depend on is a wringer washer.

Am I washing out with it? Ah, no. Cotton has to be soaked in solution and then wrung out. I don’t quite have the space even in a full kitchen dye space to wrangle 20 yards in the sink. Enter, the wringer washer. It will hold ample washing soda solution and fabric, and then wring your fabric out for you.

Unfortunately, like most appliances from the 40s and 50s, they’re a little old and cranky by now. When my beloved Maytag started to smoke, it was old enough to put in for social security as well as vote. We went hunting another wringer washer.

It’s not as easy as it sounds. Most of the ones out there have retired to being lawn ornaments. We found one that looked like it was in good shape except for the rust and the fact that it wasn’t moving when we plugged it in. A parts machine, as Don put it.

It seemed like an easy thing to fix. Maytag made the same wringer washer for around 40 years. These washers were 20 years apart, but almost identical. But we needed to meld them into Frankenwasher! A it of this, a bit of that, put together.

We come to our heros of this adventure. I called around Galesburg, looking for someone who might help us with the frankenwasher project. I got a resounding no. No one had wringer washers. No one knew how to fix a wringer washer. No one would want one, would they?

Until I called Dillons Appliance. I love mom and pop stores. I got Sam who knew is father, Jack, used to work on them.. Jack talked his grandson, Jackson through it. And Jackson, who is a brilliant young mechanic, learned from his grandfather how to fix a wringer washer. IT LIVES!

So the moral of the story is don’t let anyone tell you no. All they are telling you is that they can’t help. Keep going till you find someone who says yes.

And find the really good mom and pop businesses that do say yes, because they are treasures, not only because they are willing to help, but because they have wells of knowledge others may have forgotten, and are there for you.

Do check out Dillons if you need an appliance in Galesburg. Frank and Frankson are my heros.

 343 S Chambers St. Galesburg, IL 61401. · (309) 343-0476. 

The other hero of all of this is Don, who is willing to drive all over the countryside searching for ancient appliances and his friend Joe who has moved more appliances with Don than I can count. Did I tell you I’m a lucky girl?

The Thread MAgic Stitch Vocabulary Book is Available in Kindle!

| ellenanneeddy

The Thread Magic Stitch Vocabulary Book went up yesterday on Kindle and is now available! I’ve been sharing my chapters with you so you can get a taste. This is the classroom book that shows you most of the technique

es I use for my work.

I will be teaching the class, Thread Magic Stitch Vocabulary Book for the Gems of the Praire Guild in Peoria on May 4th with a lecture on May 3rd.

This is my first guild gig in about 10 years. There are a lot of reasons for that, and I don’t know that I’m back to a gig I have to travel for yet. But I am so excited to be back in a classroom, and I’ve found there are so many techniques that have changed or modified over that period of time. And so many more things I can do with those techniques..

So I did this booklet, especially for this class. But it should stand alone as a set of exercises you can use to build your skills and stretch your abilities. There is a full toolbox of free motion techniques you can include in your work with just a little practice.

You can see several chapters up on earlier blog posts.

Product or Process. How Do You Learn Best

Bobbin Work

Hard Edge Applique

Skills covered
Free motion straight stitch
Free motion zigzag
Bobbin work
Hard edge applique
Soft edge applique
Working with Angelina Fiber
Working with dyed cheesecloth
Couching
Adding silk flowers and leaves
Globbing

I tried to write a book that would cover a lot of information in a small space. I’m hoping you find it useful. You can order the Kindle Stitch Vocabulary Book right now. The print book will be out at the end of the month, and it’s part of your kit if you are taking the class.

I’m so excited to be sharing this material with you and to be out teaching again with the best people in the world. Quilters!

Translucence: Making Stitchery Look Transparent

| ellenanneeddy

I’ve been rethinking how I usually make my dragonflies for my quilt Great Blue. I picked up some new research books and I was struck how very transparent and translucent their wings were. How could I do that?

Dissolvable stabilizer really is transparent and has that look. But it’s made to dissolve if it gets wet. I can’t promise that won’t ever happen. Humidity itself might dissolve the stabilizer.

I’m pretty sure Saran Wrap would tear. Sure enough not to try it.

I I have used organza or lace. It’s a neat look and I like it. But I wanted a more integrated stitched effect. I wanted them to appear to be see-through.

So I thought about it in terms of thread choices. I love Madeira Supertwist. It’s my go-to metallic thread. There are several color ranges. One range is of solid metallic colors. But one of the color ranges is opalescent and crystal. It’s translucent in itself. So I used it in the transparent part of the wings, and the metallic parts in the exoskeleton of the dragonflies.

It doesn’t look transparent exactly. It looks reflective, like glass or water. Not quite what I had in mind, but I think it does the job.

Here’s the difference. This bug is out of solid metallic thread. It makes a bolder statement, more like an exoskeleton than like see-through wings.

All stitchery is a gigo proposition. Good things in, Good things out. When you use excellent threads and get excellent although sometimes unexpected results. I’m going to try these crystalline threads in other ways where I want a translucent look.

FS2/20: The Thread That Looks Like Beading

| ellenanneeddy

Most of my work centers around threads, so I fuss about them quite a bit. Most threads divide into their components: metallic, rayon, cotton, and polyester. Fs 2/20 is a bit different. It has a black core the metallics are wrapped around and when it’s used in zigzag embroidery looks like little beads.

Madeira Threads Metallic Thread Color Chart FS 2/20

These lizards were stitched as bobbin work, out of FS 2/20. The eyes are sliver.

\

In contrast, these butterflies were all out of Supertwist Madiera metallic, with FS 2/20 bodies. Again, shiny Sliver eyes.

Why does all that matter? Because those three kinds of thread offer a totally separate look that makes the objects embroidered in them automatically different from each other. Your eye sorts for shiny first. That means that first, it sees the shiny eyes, then the supertwist butterflies, and finally the rich beaded looking lizards. Now, how cool is that?

FS 2/20 is not an easy thread to find. To my knowledge, you need to get it from Madeira. But I do think it’s one of the most beautiful threads I know of. They also have Poly Neon and Supertwist and a bevy of embroidery stabilizers.

For more information about using different kinds of thread, check out Shimmer: Defining the Background.

Shimmer: Defining the Background

| ellenanneeddy

I have two quilts I’m finishing right now that you’ve been watching me work on. The threads I choose make all the difference in their background effects. Shinier threads will create a shimmer, a wet or wild area. Less shiny threads are more indicative of air or ground. I’m treating them with different threads and patterns to create a specific effect in each case.

For a very wet look, I’ll use Sliver and other flat threads. These really shine across the surface. I prefer them for either starry nights or for water.

The other thread I’m using is Madeira’s bug body thread, FS2/20. This amazing thread has a black core that gives it a very different texture. Zigzagged it does look like bugs. As a stipple it has a sharp look without the intense shine.

I consider both these threads incredibly beautiful and essential. But I use them very differently. Because they create an incredibly different texture. Why is that important? The texture defines the area for our eyes. Shiny thread will create that wet feeling. A sharp undefined metallic does excellent air or dirt, all defined in our thread choices, with no more work to it than that.

Green Heron Hunting is set with water, air, leaf, and ground elements. The air and the ground are very similar. I don’t want a soft look. It’s fall, so I want it to be crisp and textured. So I chose Sliver for my stream. But the ground area with the frogs and the leaf tree tops are stippled zigzag with the FS2/20. There’s a glint of metallic, but it’s different from the high sheen of the water and the eye separates them immediately.

For the air, I chose a driving straight stipple pattern to suggest wind. But I put in a repetitive garnet stitch in it to make it look more driven.

For Fishy Business, the background is all water. So I used Sliver-type threads exclusively. The very shimmery background contrasts highly with the completely poly-embroidered fish. They both shine, but in very different ways.

Your thread choices and stipple patterns define the background. Contrast is the key. If your background and images contrast each other, they will stay visually separate, and help your eye to see the separation.

If you’d like more information on stippling and threads, check out. Skimming the Surface: Bobbin Work as Stippling.

Leafmeal Lie: Making snippet scrap Leaves

| ellenanneeddy

I don’t follow trends well. If it interests me it interests me. If it doesn’t, it’s background noise. So the snippet thing just went right past me. It’s an interesting technique, but it didn’t work with what I was doing.

So I was working on Green Heron Hunting and I needed to do something different with the leaves. I’ve often used green sheers with stitching to create folliage.

snips arranged on Steam a Seam 2

But I wanted fall leaves. Small fall leaves. I didn’t want them to be detailed. Just bits of color. So for this, the snippet thing made sense. I sat down with a pile of hand dyed scraps, and cut some bits. I cut a cloud shape of Steam a Seam 2. I arranged the bits on to the Steam a Seam 2 backing and pressed them on high heat with a non-stick pressing cloth.

The trick with a pile of snippes is stitching them down without them getting caught in the darning foot or having them go all over. I’ve seen snippets done with tulle over them to control the bits. Personally, I don’t like the look. I can always see the tulle. It looks either too dark or too light and it spoils the effect for me. So i decided to stitch them down with a top layer of dissolvable stabilizer, to keep things from getting tangled.

Dissolvable stabilizers have been around for a while. They are a film made from cornstarch and dissolve in water. They have a lot of commercial uses for computerized embroidery, but they also work well for free-motion embroidery. I don’t know that they stabilize so much as they keep the machine feet from getting tangled in the thread and bits of fabric. Originally they showed up in the 80s as Brama Bags, a dissolvable laundry bag for hospitals, where they were concerned about contagion from people’s laundry. It’s only gotten better since then. There are lots of different brands. The difference is in how thick the film is and how easily it dissolves. I like Aqua Film, which is now called StitcH2O, by OESD. But there are also Solvey, and Badgemaster and new ones come out all the time. What you are looking for is a film that’s steady enough to stitch over without being too thick. Thick ones take forever to dissolve.

That made a tree top I could iron onto the piece itself. But I never trust glue. It sometimes just comes loose. So it needs to be stitched over. And all those little bits of fabric, even glued, are going to go everywhere. So this is where I used my Aqua Film. I pinned over a sheet of the film, and stitched it with a zigzag stitch and a metallic green/brown Metallic thread called FS2-20.

After all that stitching, I trimmed away any extra stabilizer.

I put it up on my photo wall, got out a spray bottle, and spritzed the stabilizer. It’s not instant. You need to get it really wet. But it dissolves. I put a fan on the piece and it was dry the next day. The color darkened a bit, but I’m still happy with the result.

So these trees work for me. The frogs and heron are so busy, there needed to be similar excitement going on up top.

I’ve also used dissolvable topping film for a technique I call globbing, where you stitch down a glob of thread onto a quilt. Just put the thread where you want it, pin the stabilizer on top, and stitch in circles until it’s significantly attached. They work well for stitching over delicate things like Angelina Fiber, where, again your pressure foot is likely to get caught. You can read about it in Another Fine Mess: Globbing, What’s on Your Floor

Hang ’em High: How To Make a rod Pocket without Hand Stitching

| ellenanneeddy

Every quilt you want to hang will need to have a rod pocket. The tradition is that you sew a tube and hand sew it on, I will never live that long. I hate to hand sew. It certainly would feel like I’d lived too long if I had to sew rod pockets that way.

Enter the wonderful world of glue. I’m a fond friend of Steam-a Seam for applique. But it has a version that comes in strips that makes a snap out of making a rod pocket.

Now we all know not to trust glue. It can, and will come loose at the most miserable times. I always stitch it down eventually for safety’s sake. But there are seams that take stress and seams that don’t. For a seam that has nothing pulling on it, you can fuse it and forget it. And a rod pocket has 2 hems and a seam that does not bear weight or take stress.

Each rod pocket is a rectangle that needs to be hemmed at the short sides and joined into a tube. It’s easy to do that with a strip of Steam a Seam 2.

It can be done in two pockets if you want a break in the center for a hanging hook.

What size should it be? Depends on your rods and depends on the size of your quilt. But I always go a bit wider than I think is needed. 6-8″ for something small. For a larger quilt, a 12″ pocket isn’t too big. If I cut the length of the rod pocket to the size of the quilt, by the time I fold over the two hems, it’s a perfect size to hold a rod without the rod peeking out.

I’ve put Steam a Seam 2 down both ends of the rod pockets and ironed the two hems. Then I’ve fold ed the rod pocket into thirds. I put Steam a Seam 2 on the folded up edge, and folded the other flap to meet. Iron it down and you have your rod pocket.

So now you have your pocket, without a stitch in it.

The rod pocket holds up the weight of the quilt, so it does need stitching to hold. But we can put it into place and baste it with the Steam a Seam 2 to prepare it for stitching.

I always stitch a rod pocket down, but I glue them first. I put two lines of Steam a Seam 2 down the length of the rod pocket. I center them on the back of the quilt on top and iron them down.

Then I put monofilament nylon or poly into both the top and bottom of my machine and set my stitch on a hemming stitch. I’ll need the hemming foot as well. It rides right along the edge of the pocket.

Set the hemming stitch just a bit wider than it sets for a regular hem. Stitch down one edge and then the other.

Will it show? Not very much. You might find the line of stitching where the hemming stitch is, but I guarantee you’ll have to look hard for it. Job done. Not a hand needle in sight.

For more information about Steam A Seam 2 check out Sun, Clouds, Water, and Rocks. You’ll find Steam a Seam 2 in 1/2″ strips at Amazon or at your local quilt store.

To Rip or Not To Rip: Stitch removal for Zigzag Stitching

| ellenanneeddy

It happened again. I was sewing along, in the groove, grooving it when I turned over my piece and found I had the wrong bobbin in.

Not just the wrong color. Metallic when I had intended my bird to be soft poly feathers.

There are several things to do at this point. Certainly one is to put your head in your hands and wail. I tried that and it didn’t shift anything. I got out my mustache trimmer, and really looked at it.

The thread was the Madiera bug body metallic (black core) that’s purple, red and green. If it sounds odd, it is. There’s nothing else quite like it. All three shades are the exact value, so you can actually shade with it. The red was a little much, but it added an iridescence to the bird I really liked. I stitched more of it in and decided it a happy accident.

with and without metallic

There are other answers. This would have taken a lot of ripping if it was irredeemable. Enter the mustache trimmer. This is a Wahl Half Pint Travel Trimmer, that is the no-tears-lather for removing zigzag stitching. It’s available at Walmart and Amazon.

Here’s how to use it

I chose not to rip this time. But I’m equipped when I need to. As You Sew so Shall You Rip is about evaluating when you really need to rip and when it’s optional.

This time I dodged the bullet. And I like it!

Better Out than In? Some Thoughts ABout Studio Cleaning: What to Keep, What to Throw, What to Rehome

| ellenanneeddy

I’m cleaning the studio. There is only one reason really I ever clean the studio. I can’t find something.

1006 Twin Dragonflies was missing. Blissfully she showed up in a gallery I’d forgotten about.

I have a small missing quilt. This happens from time to time. Most of the time they’re in a nice safe pile. Somewhere. Except when they’re not.

So one goes through those piles All of them. All 5,378 of them. And that has brought me to several considerations.

You can’t keep everything. You really can’t. The whole idea that you would use every scrap of every fabric is….. monumental at a certain point. At a certain point, drowning in scraps goes from a possibility to an invitability.

Koi, made from embroidered fish I did 8 years ago and didn’t know what to do with.

There’s a theory out there somewhere if you haven’t used something within a year you should chuck it. I’ve found that silly.. So much of what I do is cyclical. I may very well take ten years to find a purpose for something. I almost never throw out an embroidery, even one I consider unsuccessful. It’s too much work to lose. And I never know when they will fit somewhere.

Swish, made with the leftover fish head from Koi

Tools. I’ve had very odd experiences with useless tools I’ve bought that somehow came in useful years later. I’m hesitant to toss those without long thought. Unless they just don’t work well.

Books. I have given up books. At least once I think. They’re books. Throwing away knowledge just seems wrong.

But scraps? They do pile up. I have fancy scraps of sheers and brocades, hand dyed scraps and quilting cotton. And the occasional leftover dress scraps.

For some while, I’ve sorted scraps by size and type. There’s the rock pile, pieces of hand dye that make rocks. On a bad day, I’ll cut rocks all day with Steam a Seam attached, so I have rocks to hand when I need them.

But what about strings? Raggy patches? Snips? Thread ends?

Useful, maybe. But in mountanous proportions? I know someone uses them. But am I drowning? Um, yes. A nice pile of them went to my last class as sample pieces. That worked. But they had to be big enough. So it’s a question of size. I can use a 3″ x 2″ piece but probably not a 1″ anything.

Where can it go? In a land filled with landfills, how do you find them a home? It’s like finding homes for well-deserving kittens. They need to go to the right place. They need rehoming.

Of course, schools, other crafters, church groups, nursing homes all accept donations. Other artists always need supplies and sharing supplies is a glorious thing to do. But in the same way you’ve found wonderful things at the thrift store, it’s a good place to give them wonderful things. Except that it’s mixed in with household goods and sports equipment.

We have a new store in Galesburg called Yours 2 Create that I am in love with. It’s a thrift store for artists and crafters. Not only can you find all kinds of arts and crafts supplies, but you can also donate all kinds of things for other artists that you no longer want to work with. The range is astonishing. Crayons, paints, fabrics, tools, broken jewelry, trims, silk flowers. I’ve always gone in there on a mission for a particular thing, but they have almost everything from time to time.

some of their trim collection

I wonder how many of these stores exist. This is the first one I’ve ever seen. But it’s an astonishment. What an incredibly smart idea! What a great resource!

Yours 2 Create is located at 2188 Veterans Drive, Galesburg, IL, United States, Illinois, They’re getting a big bag of goodies from me next week. And I may be able to walk through the studio without creating a landslide.

I’m also hoping I find my lost quilt. There may be a few more piles to go through.