Hand-dyed Fabrics

Getting fabric Straight: The wonders of starch

| ellenanneeddy

One of the constants of quilting is that the methods of fabric care we enjoy now don’t always work for quilting fabric. Why? Quilts are mostly cotton. Cotton is not perma-press. It can be made so, but it’s hardly cotton after that. It dries at a different temperature, it shrinks, it is more vulnerable to mildew. It does not act like a polyester fabric. And it never will. It’s cotton. It’s a natural fiber that does not ever act like a test tube baby. And it rumples. There are no wrinkles like cotton wrinkles.

So, many of the tools our grandmother’s used to work with cotton still work best. I have a wringer washer and mangle for dyeing fabric. They both are made pretty specifically for cotton and still do the job they were made for.

We talked several weeks ago about cotton and irons. Cotton takes real heat. The old fashioned irons do that.

Here’s the other unspoken bit about cotton. It’s made of fibers that move, shift and don’t stay steady. You can tear fabric straight on the edge and have it still not lie square. There is, however, a secret weapon. Starch.

You know that wonderful crisp feeling that your cotton has off the bolt, when it feels like a thin piece of paper, only fluid. That’s created by starch. Starch is one of several chemicals they use to finish fabric. So is formaldehyde. If you’ve ever walked into a fabric store and smelled a strong chemical smell, that’s probably it. A good prewash removes much of that smell. But it also removes the starch.

We joke about starch in someone’s underwear and complain of too much starch in new clothes, but for quilting, it really helps us out. It means things are more stable and don’t move around. Those moving, shifting, shifty fabrics stay flat and stay straight, making it easier to piece straight seams. I’m told it’s excellent for hand piecing. It keeps the fabric smooth and steady underneath the needle.

I became aware of the starch factor when I began to dye all my fabric. It just didn’t have the same body as unwashed fabric. I experimented with spray starch and found it expensive but helpful. It was also very hard to control how much starch you got. And you often got spots.

Then I found liquid starch. Stay Flo has turned out to be the best I’ve used. It comes in a jug and you mix it to the level you want. I usually use 1/3 cup of Stay Flow to 2/3 cup of water. Roughly. I mix that in a cheap spray bottle.

But here’s the secret weapon. On my last wash out, I put in a cupful of starch in the softener cup of my washer. I also put in a capful of a professional softer called ProSoft or Milsoft. On it’s final rinse, it starches all my fabric evenly. Then I let it hang dry and iron it while damp. Perfection.

Here’s an interesting article from The Spruce with more technical information about sizing and starches.

Starched fabric is so much easier to piece because it doesn’t shift as much.

I’ve been piecing another landscape gradation, and I gave it a final starch before pressing it. It changes how your fabric lies, how it irons, and how it handles under the needle. And you don’t need to stop and smell the formaldehyde. How good is that?

Over and under: three dimensional leaves

| ellenanneeddy
The leaf is all one piece of fabric. The threadwork defines the fold.

If you’re making nature quilts, you’re likely to need to answer the leaf question. Leaves ripple and rumple and almost never lie flat. And they fold. How do we make that happen on the quilt surface?

Here some approaches.

defined by stitch

I tend to use a free motion zigzag stitch mostly to apply leaves. It’s fluid. It follows curves. And I can change color at will. I also tend to use a polyester Neon embroidery thread by Madeira. It’s strong, bright as a button and light enough to stitch over several times until I get what I want.

Dividing a leaf in half and coloring it with one side dark and the other light creates an immediate sense of dimension for this quilt. It’s the same fabric, but the coloration changes with the thread choices.

defined by applique method

Direct applique is applied right to the top of the piece with glue. I use Steam-A-Seam 2 by preference because it allows me to move the piece around before I iron it into a permanent place.

This makes simple shapes easily. But it doesn’t allow for wild curves and vines

The leaves are drawn on a separate fabric and stitched to the top. Then the access is all trimmed away.

cutaway leaves

Cut-away applique is done with a cloth laid over the top and stitched in the shape you want. Then the leaves, vines and trees can be cut away along the stitch line, leaving more fluid shapes.

Leaves formed by cut-away applique continue the background shading through peek-a-boo holes.

Cheesecloth leaves

The sheer qualities of cheesecloth and the texture mimics the cell structure of the leaves and lets bits of the background through. Cheesecloth makes fabulous leaves and can be dyed any color with Procion dyes. The wild stitching with lime and orange makes them look crinkled.

Making the leaf fold

This cheesecloth leaf folds along the darker blue line of thread. The threadwork itself defines the fold. The purple line on these leaves folds the center and the two slightly different thread colors top and bottom help confirm that.

Mostly leaves are defined by threadwork. These are some ways to make leaves look like they popped out of the background. And that’s pretty much what you want.

Splitting the sky: The Advantage of Split Light Sources

| ellenanneeddy

I don’t piece well. It’s not my skill. Anything that takes accuracy and careful cutting really isn’t my skill. The new 770 Bernina came with a foot that does make it better, but I don’t normally do large pieced tops. I know better. It’s not pretty when I do.

But there are rare occasions when I piece a split light source top.

Why? Why walk into accuracy land and piecing?

A light source brings you fabric with direction, and a built-in world. That world can be integral by itself. But if you want to filter the light as if it were through haze, woods, or shadow, you can piece two light source fabrics to create that shaded look. There are several approaches, with different effects.

Vertical Piecing

Where the Heart is

Where the Heart Is was pieced from two separate yards of the same blue/orange color range. I lay both pieces together on the cutting board and cut them in gradated strips, 2″, 3″, 4″, etc. Then I sewed them together with the narrowest light of one to the widest side of the other, in gradation. Set in a vertical arrangement, it makes for light flowing through the trees.

Horizontal Piecing with a Frame

Envy

Envy was one horizontal light source yard, split in gradations with a half yard cut in 2″ strips put between. The piecing creates a sense of space. The narrowest strip in the gradation defines the horizon line.

Piecing within Multiple Frames

Sometimes I split the two fabrics with the light at the widest on one side and the dark widest cut so they can carry the light across the piece. Twightlight Time was also double framed with a 2″ and a progressive border. Having a narrower border on the top weights the bottom of the piece.

Piecing Machines

Lately, Don found me a Singer 99 at a yard sale. For those of you not familiar with these darlings, they are a featherweight industrial drop-in bobbin Singer. They only straight stitch, but the stitch is impeccable. They are tougher, and faster and they use bobbins that are still commercially available. I’d never seen one before, but I fell in love instantly. It took a little work and some creative parts searching, but Don got it working for me and it’s perhaps the best piecing machine I’ve ever had. Did I mention Don is my hero?

So I pieced the guinea hen’s background on it.

How do you keep it straight? It’s tricky. If I get them out of order the fabric doesn’t progress correctly through its colors. I make all my cuts, leave the fabric on the cutting board until I can number the pieces all on the back side. Since there are two pieces of fabric cut, I label my fabric, 1a,2a, etc. and 1b, 2b, etc. and chalk in the sequence on the ends so I can always keep them in order.

Expanding Fabric Size

Sometimes there’s just a beautiful fabric that needs to be bigger. That’s been known to happen too.

I needed a background for What the Flock, a grouping of guinea hens. I’m low on fabric and money right now, so I have to make do. I found a purple piece that should make a great meadow, but a yard was just a bit small. So I pieced in another half-yard to expand it. I cut the half yard in 2.5″ widths and graded the yard-long piece in segments of 9″, 8″, 7″, 6″, and 5″,

Seam Rollers

For those of you like me, who hate to run back and forth to the iron, there is a seam roller. You can use this gadget to flatten your seams right where you’re sewing. Roll it over the seam and you’ll have flat, ready-to-sew seams without the iron woman run.

I don’t piece often, but these backgrounds are worth it. I love the shaded light and the action of light of the fabric across the piece.

the irony of ironing: taming exploding fabric drawers

| ellenanneeddy
Sheers and metallic lace make the water for this fish

I have several kinds of fabric stashes. There is a small but excellent stash of hand dyed cotton and cheesecloth, and the stabilizers I use. They need to be kept separate because I’d never find anything again if they were not. But there is a sparkle stash, the living falling wall of sheers. And then there is the fabric with no name. I don’t know what you call it. It’s out of the drunken prom queen collection. Sheers with velour. Twinkle organza, sparkle tulle, printed lame. It was originally fabrics samples for fancy dresses.

Much of it came from the Textile Fabric Outlet, which still is at 2121 21st Street in Chicago. But I’ve bought pieces anywhere I found them in my travels. I hope and pray I have a lifetime supply. I haven’t been there in a long time, but they assure me they still sell samples and remnants.


The fabric gets put into different drawers, according to it’s purpose. I have a collection of plastic drawers where I keep fabric and thread. They’re plastic, light weight and cheap. No one ever said they were decorative or stable. But they hold quite a lot of clutter. They pop together like pop bead necklaces. They also unpop from time to time.

That’s when the drawers explode.

Last week one of the stack of two fell of it’s own accord where I usually sit in the cutting room. Thankfully I was not there. Drawers everywhere. Fabric everywhere. And of course since I get lazy and don’t exactly put things away, it all looks like crumply, rumply wads of indescribable stuff that is hopefully fabric. Who knows?

That, and my machine being still out to be fixed led to at least three days of intensive ironing and sorting. Yes, I know, iron is a four letter word. But this time it really helped me out.

Anthony Jones, a fellow quilter who’s taught at many conferences with me once pointed out the difference between pressing and ironing. Anthony started as a tailor and has gone onto quilting. But his early training was in couture. He told me that ironing is the flattening of fabric. It’s a sliding movement across the fabric. Pressing is ironing in one place to persuade a seam to be on one side or another. Pressing leaves the fabric in one place. Ironing moves the fabric, and sometimes your seam as well. There is a difference.

Well, in this case it took ironing. It turned out I could iron 3 drawers in one day. That sounded like process until I counted up to around 40 drawers. I think I have my non-creative fabric project for low energy days for a long time.

One other word about ironing, it’s all in the fabric content. Anything that is a test tube baby,(nylon, rayon, and polyester) can and will melt. I’ve done it once in demo. It was quite dramatic. For regular cotton ironing I use a Black and Decker Classic iron, a recreation of the 1950s black irons. They use very high heat and generate a lot of steam. For the test tube babies, one of the modern irons that are made for polyester clothes is safer. I no longer use expensive irons. These fit my needs just fine.

I found fabric I’d long forgot. I have small sample bridal and dressy fabric samples that make the best dragonfly wings and bug bodies. And wonderful lace and organzas that make landscapes and sky washes. There were wonders I hadn’t seen in years.

And being someone who never really cleans, folds or puts away except when drawers fall out, I had no idea how much less space it takes up to store folded iron fabric instead of stuffing it in a drawer. Who knew?

My machine is home, 6 drawers are ironed and we will resume the channel to chaotic embroidery until the next disaster occurs.

Fade to Black: Shading black objects for dimension

| ellenanneeddy
Envy

Black and white have the same problems. They’re absolute colors that are really harsh statements in their full form. I almost never do a completely black or white object because they are so overwhelmingly strong and so flat. They overwhelm instead of fitting in.

I’ve worked on creating a white dimensional bird out of different pastels and greys. You can see the result on this post, Into White.

But would the same approach work with black? Instead of using tinted pale colors to create depth, use toned darker colors to create shades of black and greys? That’s what I’m going to try. I’ll take step by step photos so you can see if it works.

Indigo Blues

Have I ever done this one this before? Sort of. I’ve done black before, but when it comes to the contrast shades I’ve turned to purple and blues all of which because they were in my stash were a bit bright. The effect was essentially a purple and blue bird. It’s a fun art statement, but it wasn’t what I was aiming for. I really did want black.

I found this great drawing of a raven I did years ago. It fits into my birdfeeder series, so we’ll see what we get.

This turned out to be hard. I ordered the darkest threads in blue, grey, brown, and purple for it. When they arrived they did look ugly.

The other hard thing was telling which were darker. The tones were very close. I used my red, and green color filters and did the best I could to arrange them dark to light.

The real question is, is this a brown/black raven or a blue/black raven? I’ve tried to mix both blues and browns for a neutral black.

It’s not uncommon for this process for the stitching to be discouraging. It doesn’t look really impressive half way through. So I’ve taken step by step photos so you can see the change.

It didn’t work the way I expected. I was quite disappointed. Then I did what I had planned in the beginning. I used black metallic as my last color. The last color is always your strongest color and the one you will see the most.

The final thing that helps this out is the background. I’m using this piece of hand dye that pulls towards the brown/grey shades even with the yellow reds in it. The color of your fabric is the light source of your piece. This background echoes the brown/blue/black quality of the bird.

Is this a final answer? It is for this piece. I want to play more with it after I’ve had a color fix working on something bright and showy. All these neutral darks are depressing, but I think I got my bird where he should be. I think he needs to be flying over conifers. Maybe I do too.

Spring Dyeing!

| ellenanneeddy

Years ago, I did a very bad thing. I had dyed fabric all day and I went to the pool. You don’t get pretty dye on yourself when you dye. And it all soaks through to the skin. You mix all those colors and you get brown. Mostly down your belly and your tits.

So I was walking around with nothing but a towel over my shoulder when a very kind person looked at me and said in horror, “You don’t have to put up with that.” I looked at her and said, “Actually, I do. I’m dyeing.” I did explain to the poor soul afterwards.

I’m a fabric snob. Sorry about that. I’ve been dyeing my own fabric for my projects since I was ten. It was Rit Dye and we won’t talk about the quality of the fabric, but I understood even then that someone else’s fabric isn’t mine.

Don’t get me wrong. I love prints. I can get drunk on color and add good design to it and I’m a sloppy drunk. You can tell by the cut bits of fabric on the floor.

But I want the colors and intensity of my fabric. And I really hate fabric repeats unless they help your piece along. I’m probably going to dye as long as I quilt.

With the stimulus check (Bless those congress critters!) I’m planning a dye day. I need a new batch for me, but I’ve always got space in that batch for someone who might like to order a box of fabric to choose from, or someone who wants something special dyed just for them. A batch of light source fabric in 3/4 yards? A selection of actually not boring browns. Some deep lake or pond scum fabric. All available.

I’ve also dyed cotton/hemp/bamboo/rayon clothes for people. There are those of us who should never wear white. There is inevitably a day when it is white no more. At which point, I dye it and wear it till the threads fall apart. I can do that for you too.

If you would to either make a general fabric order, or order something special for a project, let me know. I’ll dye for you.

The Miracle of Cheesecloth: Not Just for Turkey Anymore

| ellenanneeddy

I love sheers! I love the ability to have my background peak through the sheers to create the connection between background and an object.

But most sheers don’t paint or dye well. They are poly or nylon. They come in bright colors, but they have other problems. You can paint them in pastels. They don’t dye with fiber reactive dyes at all. And if you get your iron temperature wrong, they melt.

But cheesecloth does all that well! It’s all cotton, and woven loosely. And you can iron it on fry and it behaves like cotton.

You know cheesecloth. You just aren’t used to it in the sewing room. It’s an airy woven cotton people used to use to make cheese (hence the name). Or on turkies to keep the breast moist. You may have used it to make Halloween ghosts or Christmas angels.

But dyed, it can be any color in the universe. I include it in a regular dye batch and it dyes like a champ with fiber reactive dyes. And it washes out easily in your regular washer in a nylon lingerie bag.

It makes amazing leaves! The weave in the cheesecloth looks like the cells of the leaves and the stitching defines the color.

My favorite thing to do with cheesecloth is to make mushrooms. Child of the 60s that I am, they are a flora that fascinates me. And they are an excuse for eye popping color

I do make them in batches. I’ll line up a set of mushrooms on a piece of felt, using Steam a Seam 2, pull out my brightest polyester embroidery thread and stitch up batches of mushrooms at a time, that I’ll use in many different quilts. The bright colors and zigzag stitch pop the the colors to a peak intensity. Now, who doesn’t want that?

What I did differently, is I made some smaller ones for pins and patches for my friend, Sherrill Newman who owns the South Shore Market in Porter, Indiana.

I almost never make these available to people except as finished quilts. But she talked me into it. I made a small batch for her store. Some of the left overs I’ve put on sale on Etsy. They have pins backs on them, but if you wished to use them as a patch, it would be a matter of a moment to remove that with a seam ripper.

Hand dyed cheesecloth might just be the sheer you’ve been longing for. Bright, cotton, and beautifully texturized, it makes great flowers, leaves and ‘shrooms.